Description
LePage® Plastic Wood® is a high quality wood filler containing natural wood fibers for a fine texture and true wood appearance. It dries to blend with most light coloured wood and can be stained, painted and varnished.
RECOMMENDED FOR:
Fills cracks, holes and surface imperfections on wood. Smoothes seams and dovetail joints. Allows nail holes to dry in 10 minutes.
NOT RECOMMENDED FOR:
Continuous water immersion.
FEATURES:
Contains natural wood fibers: Dries to a true wood appearance
Takes nails and screws without splitting
Water Resistant: Interior or exterior applications
Easy to sand and will not clog high-speed sanders
Fast drying formula
CLEAN UP:
Clean tools and filler residue immediately with mineral spirits. Cured filler may be carefully cut away with a sharp-edged tool or sanded.
HOW TO USE:
STEP 1 – Apply and let dry in a well-ventilated area. Wear gloves. Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion. If desired, pre-tint with stain.
STEP 2 – Test a small sample and compare colours once dry. Stir material thoroughly before application and periodically during application to ensure that the wood filler is a uniform consistency.
STEP 3 – Apply with a putty knife, working into cracks and holes. Cavities deeper than 0.6 mm (1/4″) should be filled in thin layers, allowing each layer to dry before reapplication.
STEP 4 – Fill final layer above the surface and sand once dry with 120 grit sandpaper. Paint, stain or varnish once dry. When staining, filler may absorb stain differently than surrounding wood.
STEP 5 – Test a small area until desired effect is achieved. For exterior applications, cover with an exterior paint
